iPECS LIP-8040E, User Manual

Page: 86 / 86

●
IP KEY TELEPHONE SYSTEM / SLT User Guide iPECS-50/100/300/600/1200
To activate Call Forward to Voice Mail Group,
●
Lift handset.
●
Dial 5 5 4 .
●
Dial Call Forward type number (1~4)
●
Dial Voice Mail Group Number.
●
Hang up.
To deactivate Call Forward to VMIB,
●
Lift handset.
●
Dial 5 5 4 .
●
Dial # .
●
Hang up.
To hear the recorded voice Message,
●
Lift handset.
●
Dial the Voice Mail Group
to receive the “Mailbox & Password” prompt.
●
Dial the station number and authorization code
to receive the “Number of Messages” prompt.
●
Dial ‘1’, for hearing voice message.
●
To hear current voice message again, dial 1.
●
To save current voice message and hear next
message, dial 2.
●
To delete current voice message, dial 3.
●
To forward current voice message, dial 4.
●
To call sender of voice message, dial 5.
●
To skip current voice message
and hear next message, dial 6.
●
To add preamble memo on voice message, dial 7.
Programming Authorization Code
●
Lift handset.
●
Dial 5 6 1, the SLT Programming code.
●
Dial 3 3 , the Station User Program code.
●
Dial Authorization Code (1 to 12 digits) .
●
Momentarily press the Hook-switch
receive confirmation tone
Programming Your Name
●
Lift handset.
●
Dial 5 6 1, the SLT Programming code.
●
Dial 7 4 , the SLT Name Program Code.
●
Enter name, refer Alphanumeric Chart.
●
Momentarily press the Hook-switch
receive confirmation tone
Entering an Account Code
To identify a call, system provides the user with an
account code field in the Call Logging printout by
entering an account code while on an outside call.
After dialing or during a conversation with an
external party,
●
Press hook switch.
●
Dial 550 and account code.
(An account code can be up to 12 digits.)
●
Press ‘*’.
●
Continue conversation and hang up to finish the
call.
Handset Off-hook Alarm
Should the handset be left off the cradle unattended,
for any length of time, the user will receive a high
pitched signal.
●
To cancel the signal, hang up.
SLT User Guide for iPECS System
Following features are only available with iPECS
Hotel S/W.
Baby Listening
This feature allows a guest to monitor his room from any
other party of the hotel. You can hear the room which is
set baby listening but the room will not be disturbed.
To activate baby listening at guest’s room,
●
Lift the handset.
●
Dial the guest’s own room number.
(Confirmation tone is heard.)
To cancel baby listening at guest’s room,
●
Replace the handset.
To operate baby listening from any other phone in the
system,
●
Lift the handset.
●
Dial the guest’s own room number.
●
DND tone will be heard and dial the guest’s own room
number again.
●
After confirmation tone, baby listening is operated.
Maid Status
The Maid can update the maid status of any room.
To register “Cleaned” at a guest station,
●
Dial SLT PGM code.
●
Dial 6 4.
(Confirmation tone is heard.)
To register “Dirty” at a guest station,
●
Dial SLT PGM code.
●
Dial 6 5.
(Confirmation tone is heard.)
4