LIP-8040E Gigabit Phone
User Guide
61
8.6
Wake-Up Alarm
iPECS supports an Alarm clock for each station in the
system. The alarm clock can be set to repeat daily or
as a one-time alarm.
When responding to the alarm by lifting the handset,
BGM will be provided.
8.7
Alarm/Door Bell
The system can monitor external
Alarm
or
Door Bell
contacts:
Alarm Monitor
—should the external contact activate, a
unique Alarm Ring signal and LCD display may be
received. To restart the monitor circuit, the external
contacts must be deactivated and the Alarm Ring signal
terminated.
Door Bell—
a unique Door Bell Ring (single tone burst)
may be received each time the external contact is
activated. A system contact also can be assigned to act
as a
Door Open
contact.
To set the Wake Up Alarm clock:
•
Press
TRANS
/
PGM
,
•
Dial
41
(iPECS-LIK) )
/21
(iPECS SBG-1000)
/13
(iPECS-
MG) (Alarm Clock code),
•
Dial 2-digit hour and minute (hh/mm) for alerting,
•
For a daily (repeating alarm), press #,
•
Press
HOLD
/
SAVE
.
To erase Wake-Up:
•
Press
TRANS
/
PGM
,
•
Dial
42
(iPECS-LIK)
/22
(iPECS SBG-1000)
/14
(iPECS-
MG) (Alarm Clock delete code),
•
Press
HOLD
/
SAVE
.
To terminate the Alarm signal:
•
Dial 565(iPECS-LIK & MG)/65(iPECS SBG-1000) (Alarm
Stop code).
To activate the Door Open contacts:
•
Lift the handset,
•
Dial Door Open code, #* and contact number 1-4.
