iPECS iPECS 7016D, User'S Operation Manual

Page: 41 / 49

iPECS
7016D & 7024D Phone
User Operation Guide
38
• Use the ▼
V
olume ▲ to select a call forward destination for your
calls, speed dial, joined mobile phone, VSF, or VM group.
• Press the
H
old/
S
ave button.
9.
Working with PBX, Centrex and ISDN
features
9.1 Access PBX or Centrex features
The iPECS has been designed to operate with a host PBX system or
Centrex services from your service provider. The iPECS connects to
such a host with analog CO lines.
When you access such a CO line, your phone will act as an extension
of the host, allowing access to the host system features through dial
codes of the host.
While on a call, you use the iPECS
Flash
feature to transfer calls to
other host extensions or access features of the host.
The
Flash
feature may be used on other CO lines to regain dial tone
from the CO line without relinquishing control of the CO line to place
another call.
OPERATION
To access PBX or Centrex features while idle;
• Lift the handset,
• Select/dial access a PBX/Centrex CO line,
• Dial PBX/Centrex feature code.
To access PBX/Centrex features while on a PBX/Centrex CO line;
• Use the Navigation button to display next menu and Select the
FLASH
Soft button,
• After receiving new dial tone, dial PBX/Centrex feature code.
9.2 Access ISDN network features
9.2.1 Using the Keypad facility to access ISDN features
Access to certain features of your ISDN services requires that dialed
digits be sent to the ISDN as data and not tones. In this case, dialed
digits are sent as ‘Keypad messages’.