iPECS iPECS 7016D, User'S Operation Manual

Page: 39 / 49

iPECS
7016D & 7024D Phone
User Operation Guide
36
• Dial the Station User Program code 42,
• Press
H
old/
S
ave.
8.5 Alarm/Door Bell Operation
The system can monitor external
Alarm
or
Door Bell
contacts.
As an
Alarm
monitor, should the external contact activate, you may
receive a unique Alarm Ring signal and LCD display. To restart the
monitor circuit, the external contacts must be deactivated and the
Alarm Ring signal terminated.
As a
Door Bell
, you may receive a unique Door Bell Ring (single tone
burst) each time the external contact is activated. You may also
control a system contact to act as a
Door Open
contact.
OPERATION
To terminate the Alarm signal;
• Dial the
Alarm Stop
code
565.
To activate the Door Open contacts;
• Lift the handset,
• Dial
Door Open
code #* and contact number 1 to 4. Note contacts
3 & 4 are only available in the iPECS -300.
8.6 Power Fail Transfer Operation
When AC power to the system fails, back-up operation may be
provided with back-up batteries or
Power Fail Transfer (PFT)
. When
battery back-up is provided the station will operate normally. When
PFT
is implemented, an SLT is connected to a CO line by the system.
This SLT can be used as any normal SLT, providing service while
power is out.
8.7 System Voice Memo
The integrated
Voice Store & Forward (VSF)
module incorporates
several
Voice Memos
to provide the station users with general
information such as station number, date, time, and feature status.
Voice Memos
are heard over the speaker of the iPECS Phone and
over the handset for SLTs.
For the
Station Status Memo
, the following items are reported. Note
only activated features are announced.
ƒ
ICM Signaling Mode (Handsfree/Tone/Privacy)
Con for
viñetas
Con for
viñetas
Con for
viñetas