iPECS
7016D & 7024D Phone
User
Operation
Guide
16
4.
Placing a call
4.1 Internal
Calls
4.1.1 Placing Intercom calls
You can place calls to other stations in the system over the Intercom.
The call will ring or, for an
ICM Voice Announce
call, you will hear
splash tone. Ring or Voice Announce is normally determined by
settings at the called station but you may change this by dialing ‘#’
after calling the user. By changing the mode, a Voice Announce call
will ring or a ringing call will allow Voice Announce.
You can assign a Flex button for
Direct Station Selection/Busy
Lamp Field (DSS/BLF)
. A
DSS
/
BLF
button lets you call the other
station with a single button press. The button LED displays the other
station’s status, On, is busy, Off, is idle.
When you go off-hook, you may connect to another station or system
resource automatically. This
Prime Line Preference
may be
immediate or delayed allowing you to take other actions during the
delay. Otherwise, you may press another Flex button before going off-
hook to override Prime Line Preference.
If you go off-hook and take no action, Intercom dial-tone will time-out
and after receiving
Howler Tone
, your phone will be placed out-of-
service in
Intercom Lock-Out
. You must hang-up to return to a
normal state.
OPERATION
To place an Intercom call;
•
Lift the handset,
•
Dial the Intercom number of the desired station,
•
At answer or Splash tone, speak to the called party.
Summary of Contents for iPECS 7016D
Page 1: ...LIP 7016D 7024D...
Page 48: ...iPECS 7016D 7024D Phone User Operation Guide 45...
Page 49: ...Jan 05 46 LG Electronics Inc...
