13
Configuring Your Telephone (cont.)
Telephone Configuration
On the telephone-configuration page, you can specify your name, userid (usually the
part before the @ sign in your email address), a forwarding URL or address, the URL
or address of your voicemail and conference servers,, a dial plan, and DND and call-
waiting settings. Your page looks something like this:
Phone Configuration
Full Name
[John Smith
]
User ID
[jsmith
]
Call Forwarding
[
] None (•) All Calls ( ) On Busy ( )
Voicemail Server
[
]
Conference Server
[
]
Dial Plan
[
]
Enable Do Not Disturb
[ ]
Disable Call Waiting
[ ]
[ Commit changes ]
[ Reset to defaults ]
• Examples of the required name and userid fields are John Smith and jsmith,
respectively (no spaces in the userid, please).
• The forwarding-address field contains the network address or URL of the telephone
to which you want to forward incoming calls. Leave it blank or specify no call
forwarding if you do not want to forward calls. Select whether you wish to forward all
calls or only when your telephone is busy.
• To use a voicemail server, specify its address in the voicemail-server field.
• To use an external conference server rather than the built-in conferencing capabilities
of your telephone, specify the server’s address in the conference-server field.
• So that you do not have to indicate when you have finished entering a telephone
number by pressing the DIAL/REDIAL key or the # button (although you may continue to
do so), you may provide a dial plan of up to 128 characters (see the Dial Plan
appendix) which tells your telephone what a telephone number looks like. Once your
telephone recognizes a complete telephone number, it automatically places the call.
• When the Do Not Disturb feature is enabled, your telephone does not ring when it
receives an incoming call.
• Call Waiting can be disabled so that your telephone immediately rejects an incoming
call if a call has already been established.
Make any changes you need on this page and then click the button to commit your
changes. Your changes only take effect when you commit your changes.
There is also a button that you can click to restore the factory defaults, which are
bogus values for the name and userid fields and nothing (blank) for the remaining
fields.
