ipDatatel BAT-WiFi, Installation Manual

Page: 16 / 32

Universal WiFi BAT Installation Guide (rev 1.0) 16
Programming ONLY when using PC-Link to send Signals
(Not Recommended)
:
f GSM is used, it must be in dialer capture mode
Section BAT as
Sole
Communi
-cator BAT as
Failover w/
Add'l
Communi-
cation
Device BAT as
Dual
Reporting
w/ Add'l
Communi-
cation
Device Code Summarization
351 Enable
Option 1 Enable
Option 1, 5 Enable
Option 1, 2,
5 Options to turn on/off
alarm/restore for telephone
1 (option 1), telephone 2
(option 2), and alternate
communications (option 5).
359 Enable
Option 1 Enable
Option 1, 5 Enable
Option 1, 2,
5 Options to turn on/off
tamper/restore for
telephone 1 (option 1),
telephone 2 (option 2), and
alternate communications
(option 5).
367
Enable
Option 1 Enable
Option 1, 5
Enable
Option 1, 2,
5
Options to turn on/off
opening/closing for
telephone 1 (option 1),
telephone 2 (option 2), and
alternate communications
(option 5).
375
Enable
Option 1 Enable
Option 1, 5
Enable
Option 1, 2,
5
Options to turn on/off
maintenance for telephone
1 (option 1), telephone 2
(option 2), and alternate
communications (option 5).
376
Enable
Option 1 Enable
Option 1, 5
Enable
Option 1, 2,
5
Options to turn on/off testing
for telephone 1 (option 1),
telephone 2 (option 2), and
alternate communications
(option 5).
380
Enable
Option 1 Enable
Option 1, 5 Enable
Option 1, 5
Option 1 turns on/off
communications. Option 5
turns on/off 3rd phone
number.
381
Disable
Option 3,
Enable
Option 5 Disable
Option 3,
Enable
Option 5, 6 Disable
Option 3,
Enable
Option 5, 6
Option 3 turns on/off code
reporting. Options 5 & 6
turns on/off communication
with phone lines 1/3 & 2
respectively.
382
Enable
Option 5 Enable
Option 5 Enable
Option 5 Option 5 enables/disables
T-Link/PC-Link.
389
Set ‘003’
Seconds Set ‘003’
Seconds Set ‘003’
Seconds
The time it will take to
periodically check for faults
on the T-Link/PC-Link.