IPC Eagle BB20N, Operation Manual

Page: 16 / 40

16
Storage
1. Machine should be stored in a dry environment.
2. Store machine away from objects that may fall and damage it.
3. Never store burnisher near an open flame or heat producing device.
4. Make sure burnisher is cleaned properly by wiping machine down with damp cloth before
storing. CAUTION! NEVER PRESSURE WASH MACHINE!
5. Disconnect batteries before storage.
Operation on Inclines
CAUTION! When using the machine, go slowly on inclines.
CAUTION! Do not run burnish pad on an incline. The maximum rated climb and descent incline is 6°.
Post Operation Checklist
Turn the machine OFF and perform the following checks:
Check for wire, string, or twine wrapped around the burnish pad.
Check Wire fray or damage.
Empty the Dust Collection Bag.
Inspect batteries.
Plug in on-board battery charger.
Lubrication of Rear Casters
Each of the two rear casters has two grease fittings. Lubricate each caster with a
grease gun every 100 hours of machine operation.
Caster Parking Brake
The two rear casters are equipped with brakes. To set the brake, push down the "ON" side of the brake
lever. To release the brake push down the "OFF" side of the brake lever. The caster breaks should only
be used as a parking brake if needed. Before moving the machine make sure both breaks are released.
Body Maintenance
The body may be cleaned with a damp cloth to remove dust and scuff marks. More stubborn scuff marks
on the tank exterior can be removed with a vinyl cleaner.