IPC Eagle BB20N, Operation Manual

Page: 10 / 40

10
Controls and Instruments
Traction Model
1. Key Switch - Turns the machine on/off.
2. Handle Lever - When the lever is engaged the machine will move forward. If the Burnish
switch is on, the pad will also start turning. If the burnish head s tilted up into the pad change
position, the burnish motor will not engage.
Note: The machine needs to be moving when the burnish switch is turned on or off in order to keep from
burning the floor.
3. Burnish Switch - Turns burnish function on/off. The burnish motor will not engage unless the
burnish switch is on and the handle lever is engaged. If the burnish head is tilted up into the
pad change position, the burnish motor will not engage.
4. Reverse Switch - Hold down this switch while the handle lever is engaged and the machine
will move in reverse. Once the reverse switch is released the machine will start moving
forward.
5. Traction Speed Control - Turn the knob clockwise to increase speed. Turn the knob counter-
clockwise to decrease speed.
6. Hour Meter / Battery Discharge Indicator - The LCD displays the number of burnishing
hours. The machine will only count hours while burnishing. The row of LEDs display the charge
level of the battery pack. When all the yellow LEDs are lit, the battery pack is fully charged. In
order to protect the battery pack, when the red LED is lit, the burnish motor will
stop and the machine should be recharged.
7. Alarm LED - Displays trouble codes as a blink pattern. In normal operation this LED
will be off. If it comes on, refer to the troubleshooting section.
Non-Traction Model
1. Key Switch - Turns the machine on/off.
2. Handle Lever - When the lever is engaged, if the Burnish switch is on, the pad will start
turning. If the burnish head is tilted up into the pad change position,
the burnish motor will not engage.
Note: The machine needs to be moving when the burnish switch is turned on or off in order to keep from
burning the floor.
3. Burnish Switch - Turns burnish function on/off. The burnish motor will not engage unless the
burnish switch is on and the handle lever is engaged. If the burnish head is tilted up into the
pad change position, the burnish motor will not engage.
4. Hour Meter / Battery Discharge Indicator - The LCD displays the number of burnishing
hours. The machine will only count hours while burnishing. The row of LEDs display the charge
level of the battery pack. When all the yellow LEDs are lit the battery pack is fully charged. In
order to protect the battery pack, when the red LED is lit the burnish motor will stop and the
machine should be recharged.