- 8 -
Interface Description
Front View
From Left to right :
Power Status Indicator:
The Power Status #1 ~ #4 Indicator - Green
light ON as output power ON.
Reset :
Set back to default setting by long press
To reset to original manufacture settings, hold
down the reset button with a sharpen pin for
5- 6 seconds then RELEASE. There are 3
beeps sound which means reset start and
9858 will be rebooted itself -there is one beep
after reboot ) and most information go back to
default setting ( LAN IP ).
WPS :
Enable WPS function by one short click
There is one long beep as enable WPS
function. Please refer page #13 for details.
Link:
The Link Indicator shows the WiFi signal
transfer status. The light will be ON all the time
and flashing while transfer data.
Network: LAN
LAN 10/100 Mbps network
Network :WIFI
WIFI 802.11N-B/G