802.11n lndoor Wireless Access Point
10
3. SSID Broadcast:
This option allows you to have your network name (SSID) publicly broadcast or if
you choose to disable it, the SSID will be hidden. It is enabled by default.
4. AP Isolation:
Isolates clients connected to the same SSID.
5. SSID:
This is the public name of your wireless network. Select the SSID you wish to configure from
the drop-down list.
6.
Wireless Mode:
Select a right mode according to your wireless client. The default mode of 5GHz is
11a/n.
11a mode:
Select it if you have only 11a wireless devices in your wireless network. Up to 54Mbps
wireless rate is supported on this mode.
11a/n mode:
In this mode wireless connection rate is negotiated. Up to 450Mbps wireless rate is
supported on this mode.
7. Channel:
Select 149, 153, 157, 161, 165 or Auto in 11a mode and select 149, 157 or Auto in 11a/n
mode. The best selection is a channel that is the least used by neighboring networks.
8. WMM-Capable:
WMM is QoS for your wireless network. Enabling this option may better stream
wireless multimedia data such as video or audio (recommended).
9. ASPD Capable:
Select to enable/disable the auto power saving mode. By default, this option is
disabled.
10. Maximum Clients:
Total clients should be within 124.
3.4.2 Security
This section allows you to secure your wireless network. Here we introduce 4 security modes to you.
WEP
WEP is intended to provide data confidentiality comparable to that of a traditional wired network. Two
types of encryption can be used with WEP: Open and Shared Key.
Summary of Contents for W75AP
Page 1: ......
