300 Mbps In-Wall Access Point
User Guide
2
Application Scenarios
2.1
Large Apartment or Villa
2.1.1
Deploying the AP with an IP-COM Router that Includes
the AP Controller Functionality
For a large apartment or villa, you are recommended to adopt the IP-COM wireless product suite, which
includes a wired router (such as M30), a PoE switch (such as F1109P), and 4 to 8 W30APs.Deploy one
W30AP in each room and place the router and switch in an electronic junction box. The following
describes the procedure.
1.
Connect the devices.
Connect the WAN port of the router to the ADSL or optical modem. Connect a LAN port of the router to
the Uplink port of the PoE switch. Connect the LAN0 port of each AP to a PoE port of the switch using the
in-wall Category 5 UTP cable led into each EU-type electrical wall box used to mount the APs. See the
following figure.
2.
Log in to the web UI of the router.
Internet
Router M30
PoE switch F1109P
AP1
AP2
AP3
AP4
Living room
Guest room
Bedroom
Dining room
PC (For AP configuration)
WAN
LAN
LAN
