300 Mbps In-Wall Access Point
User Guide
7.6
Access Control
7.6.1
Overview
It specifies, based on MAC address filter rules, the wireless devices that can or cannot access the wireless
networks of the AP. Devices that have been controlled cannot connect to the corresponding wireless
network.
The AP supports the following MAC address filter rules:
−
Disable
: It indicates that access control is disabled. In this case, all wireless devices can access the
wireless networks of the AP.
−
Allow
: It indicates that only the wireless devices with the specified MAC addresses can access the
wireless networks of the AP.
−
Disallow
: It indicates that only the wireless devices with the specified MAC addresses cannot
access the wireless networks of the AP.
7.6.2
Configuring Access Control
1.
Choose
Wireless
>
Access Control
.
2.
From the
SSID
drop-down list box, select the SSID of the wireless network on which access control
must be implemented.
3.
Select an access control mode from the
MAC Filter Mode
drop-down list box.
4.
If you select
Allow
or
Disallow
, enter the MAC addresses to control in the access control list and click
Add
.
If a wireless device to be controlled has been connected to the AP, you can click
Add
corresponding to the
device in the wireless client list to directly add it to the access control list.
5.
Click
Save
.
Wireless client list
Wireless access control list