300 Mbps In-Wall Access Point
User Guide
2.
Click
Add
.
3.
Set parameters as follows:
−
Set
Log Server IP
to the IP address of the log server.
−
Set
Log Server Port
to the UDP port number used to send and receive system logs. The default
port number 514 is recommended.
−
Select
Enable
to enable the log server.
4.
Click
Save
.
5.
Select
Enable (To use the following rules, you must check this box.)
.
6.
Click
Save
.
---End
The following figure shows the configuration.
Procedure for changing log server settings
1.
To access the page, choose
Tools
>
Logs
and click
Log Setup
.
2.
Click
Edit
corresponding to the log server settings to be changed.
3.
Change the parameter settings as required.
4.
Click
Save
.
c