Printed in Hungary
Step 3 - Start DaqView & Configure the System
From Windows, open DaqView by double clicking on its icon, or use the Windows Desktop Start menu to access the
program. You will find
DaqView
listed in the Program group (Use the desktop Start Menu / Programs to access the group).
Once the program is executed, it automatically identifies your DaqBook/3000USB
and brings up DaqView’s
Main Window
.
Button Reference
(1) Scope
(2) Bar Graph
Meters
(3) Analog Meters
(4) Digital Meters
(5) Start All
Indicators
(6) Stop All
Indicators
(7) View File Data
(8) Analog Output
(9) Digital I/O
(10) Counter/Timer
(11) Waveform &
Pattern Output
(12) Acquire
(13) Show ALL
Channels
(14) Hide INACTIVE
Channels
(15) Turn All Visible
Channels ON
(16) Turn All
Channels OFF
(17) Channel
Reading
To configure channels
,
make the desired changes in the
Channel Setup
window. In addition to providing a means of
configuring channels, the window displays them.
To configure acquisition parameters
,
select the second tab (below numbers 4 & 5 in the above figure). This displays
the
Acquisition Setup
window, which you can use to set triggering and configure the scan. The settings will be used when an
acquisition is started.
To assign a filename and folder
,
s
elect the third tab (below numbers 6 & 7 in the above figure). This displays the
Data
Destination window,
which provides a means of designating the desired file names, file formats, and the directory for saving
the acquired data.
To collect data
,
Click the <Enable Readings Column> button (17), or the <Start All Indicators button> (5); the data
acquisition begins and the
readings
column becomes active. Click the <Acquire> button (12) to send the data to disk.
Click one of the toolbar’s d
isplay icon buttons to see your data in the form of a scope or meter display. Click the <Scope>
button (1) to bring up the
Scope window
. This allows you to set up scope and chart displays. Buttons 2, 3, and 4 are for bar
graph meters, analog meters, and digital meters. Note that you can simultaneously view combinations of display types.
Note
:
For detailed information, view the PDF documentation located on CD, at our website, or in the Programs Group
[which resides on your PC, after software installation].
Reference Notes
:
Adobe Acrobat PDF versions of documents pertaining to DaqBook/3000USB are automatically installed onto
your PC’s hard
-drive as a part of product support at the time of software installation. The default location is
the
Programs
group. It can be accessed via the
Windows Desktop Start Menu
.
*324950A-01*
324950A-01
IOtech, 25971 Cannon Rd., Cleveland, OH 44146-1833
phone: (440) 439-4091; e-mail: [email protected]; www.iotech.com