Note
: Specifications are subject to change without notice.
979291
Specifications - DaqBook/3000USB 7-1
Specifications –
DaqBook/3000USB
7
General Specifications
Power Consumption
: 15 watts
External Power
: External power is required; USB power is not sufficient.
Connector: Switchcraft#RAPC-712
Voltage Range: 6 to 16 VDC
Over-Voltage: 20 V for 10 seconds, max.
Environment
:
Operating Temperature: -30 to +70°C
Storage Temperature: -40 to +80°C
Relative Humidity:
0 to 95% non-condensing
Communications Speed
: USB 2.0 high-speed mode (480 Mbps) if available,
otherwise, USB1.1 full-speed mode (12 Mbps)
Acquisition Data Buffer
: 1 MSample
Vibration
:
MIL STD 810E Category 1 and 10
Signal I/O Connectors
:
(
see chapter 2 for pinouts
)
16 BNC connectors for analog input; shell is low; center conductor is high
37-pin DSUB for 16 channel digital I/O, 4 counter/encoder inputs, 2 timer output;
and 2 analog outputs
Physical Attributes
:
Dimensions: 280 mm W x 216 mm D x 45 mm H (11.0” x 8.5 x 1.75”)
Weight: 1.39 kg (3.06 lbs)
Analog Inputs
Channels
: 16 differential; BNC
Over-Voltage Protection
: ±30V without damage
Voltage Measurement Speed
: 1 µs per channel
Ranges
:
Software or sequencer selectable on a per-channel basis.
±10V, ±5V, ±2V, ±1V, ±0.5V, ±0.2V, ±0.1V
Input Impedance
: 20M Ohm differential
Total Harmonic Distortion
: -80 db, typical for ±10V range, 1 kHz fundamental
Signal to Noise and Distortion
: 72 db, typical for ±10V range, 1 kHz fundamental
Bias Current
: 40pA typical (0°C to 35°C)
Crosstalk
: -75 db typical DC to 60 Hz; -65 db typical @10 kHz
Common Mode Rejection
: -70 dB typical DC to 1 kHz
Maximum Usable Input Voltage
+ Common Mode Voltage
Ranges
Maximum
(CMV + V
in
)
5, 10V
10.5V
0.1, 0.2, 0.5, 1, 2V
6.0V
