IOtech DaqBook/2000 Series User Manual Download Page 47

Page: 47 / 90

STEP 3

–

Connect the System Components

Reference Note:

For information regarding connections, refer to Chapter 4,

Connectors, Indicators, Cables, & Pinouts

What you will need to connect a DaqBook/2000 or DaqOEM/2000 Series device to the Ethernet

•

An available connection to the Ethernet. The connection can be either

- an Ethernet jack on a computer or
- an Ethernet jack on a hub that is connected to the Ethernet.

•

An Ethernet patch cable, e.g., a CA-242 (1.5 foot cable) or a CA-242-7 (7-foot cable).

Connect the Ethernet cable to the Ethernet jack on the DaqBook/2000 or DaqOEM/2000 Series
device, as applicable.

Connect the other end of the Ethernet cable to the Ethernet jack on the host computer or
network hub.

DaqBook/2000 and DaqOEM/2000 Series

898095

Configuring the System for Operation 6-5

Summary of Contents for DaqBook/2000 Series



























































































Search results

Summary of Contents for DaqBook/2000 Series

Reviews:

Related manuals for DaqBook/2000 Series

Brands by name

Popular brands

IOtech DaqBook/2000 Series, User Manual

Search results

Summary of Contents for DaqBook/2000 Series

Reviews:

Related manuals for DaqBook/2000 Series

Brands by name

Popular brands