7
17.
Dimmer
Adjustment of the brightness of the logo lighting and the display.
18.
HDMI output selection
Selection of the desired HDMI output.
Basic Operations
Before making any connections between the AVX17 and other equipment, read the manuals that came with your
other components. Do not connect the power cord to the AVX17 until you have completed and checked all
connections.
Switching on the device:
Press the POWER button to switch on the AVX17. As soon as the power LED lights up white, the device is ready
for use.
Press the POWER button again to put the AVX17 into standby mode. As soon as the power LED lights
up red, the device is in standby mode.
Menu
You call up the menu by pressing the MENU button. You navigate in the menu using the directional pad, the back
button or the buttons on the front of the device. You will find the following options in the AVX17 menu:
SOURCE
Here you will find an overview of all sources. To select a source for playback, navigate to the desired source and
press “OK” or the right arrow on the control pad.
MODE
Here you can choose from the following playback modes:
●
Pure
The source signal is passed on to the corresponding channels unprocessed. All equalizers are
deactivated. The distance and volume settings of the individual channels are also deactivated.
●
Direct
The source signal is forwarded to the corresponding channels according to the selected settings
(speaker layout, subwoofer, speaker crossover). Equalizers are active if desired. The distance and
volume settings of the individual channels are active.
●
Stereo
The source signal is converted into stereo and forwarded according to the selected settings (speaker
layout, subwoofer, speaker crossover). Equalizers are active if desired. The distance and volume
settings of the individual channels are active.
●
Multi CH
The source signal is converted into multi-channel playback. Equalizers are active if desired. The
distance and volume settings of the individual channels are active.
7