IOTAVX AVX17 User Manual Download Page 3

2

IMPORTANT: Software update

Please perform a software update before using the device for the first time to ensure
the best possible sound experience.

To do this, follow the steps below:

1. Download the latest software version here:

https://www.hifipilot.de/Software

2. Copy the downloaded file onto a USB stick. The USB stick has to be formatted to

FAT32. The file must not be renamed.

3. Check that the main power switch on the back of the AVX17 is off.

4. Insert the USB stick into the USB port on the back.

5. Switch the AVX17 on using the main power switch on the back.

6. The AVX17 recognizes the USB stick and automatically starts the software update.

You will be informed about the progress of the update in the VFD display.

Note:

If the update does not start automatically, switch the device on with the

standby button on the front and start the update manually in the menu under Setup ->
About -> Software update.

7. The update is complete as soon as the AVX17 switches to standby mode.

8. Turn off the AVX17 using the main power switch on the back.

9. Remove the USB stick.

Note:

You will find the current software version of your device in the menu under Setup ->

About -> MCU Version.

2

Summary of Contents for AVX17













Reviews: