10
●
Reset - Resets all parametric EQ's of the selected channel.
●
Load - Here you can copy the parametric EQs of another channel (also from another equalizer preset)
into the selected channel.
Option
Here you can make the following basic device settings:
●
Startup state: Here you can choose whether the device goes into standby mode when the main switch
on the back is switched on or whether it switches itself on completely.
●
Volume options: Here you can make the following volume settings:
○
Power ON Volume: Defines the standard volume when the device is switched on.
○
Max Volume: Defines the maximum adjustable volume level.
○
Volume Step: Defines the size of the volume steps for volume control.
○
Vol Disp Mode: Defines the display format for the volume level.
●
HDMI option: Here you can make the following HDMI settings:
○
HDMI OUT Select: Here you can select the desired HDMI output.
○
Standby Video: Here you can choose whether the AVX17 should loop video through in standby
mode.
○
CEC Source Control: Allows the AVX17 to control playback via a source device
○
CEC Control: Allows cross-component control options
○
HDMI Format: Here you can select one of the following formats for the HDMI inputs:
■
Auto: The video format is adopted from the source.
■
Standard: Video is output in 1080p.
■
Enhanced: Video is output in 4K.
●
Information disp: Here you can make the following settings for the VFD display of the AVX17 and for the
on-screen display (OSD) on your:
○
picture display deviceDisplay DIM: Here you can dim the VFD display of the AVX17 in 10
steps.
○
OSD information: Here you can set which information should be output via the OSD.
○
OSD info position: Here you can set where the OSD should be displayed on your image display
device.
○
OSD Transparency: Here you can set the transparency of the OSD.
●
No signal standby: Here you can set whether and after what time the AVX17 switches to standby mode
if there is no signal.
●
Trigger output: Here you can make the following settings for the trigger outputs:
○
Always OFF: Deactivates the trigger outputs
○
Always On: Activates the trigger outputs always
○
By Source: Activates the trigger output when a source is selected where the “Trigger out ”is set
to“ On ”.
●
Unit: Here you can set the unit of measurement for the settings.
●
U Driver log: This function is only used for internal purposes.
Save and Recall
Here you can save, load or reset device settings:
●
Save to backup: Saves your device settings in an internal backup.
●
Load from Backup: Loads your device settings from a previously saved backup.
●
Load from default: Resets the device to the factory settings.
About
Here you will find information about the current firmware version as well as the names of the connected devices
and you can make the following settings:
●
Software update: Here you can install the software from a USB stick connected to the rear.
●
Bluetooth name: Here you can rename the connected optional Bluetooth adapter.
10