7
Step 6. Connecting Hand Controller
Plug hand controller into any one of the HBX (handbox) ports on
the mount. Plug in power plug if a AC adaptor is used.
Turn on power. Now you are ready to observe. Use the 4 Arrow
keys (
▲▼◄►
) to rotate the scope Up, Down, Left, and Right.
Use the Number key to change the slew speed from the slowest
(1 - 1X) to the fastest (9 - MAX).
The other HBX is reserved for accessories, such as electronic
focuser, laser pointer and autoguider adapter.
DO NOT plug
non-iOptron accessories into the unit to avoid damaging the
mount or accessories
7
. This step allows you to attach the counterweight to the mount.
(note: if you have a scope less than 7 lbs., attaching a
counterweight is optional).
Unlock and remove the altitude lock (#4). Screw on the counterweight
shaft and tighten it.
8.
Slide the counterweight onto the counterbalance shaft. Next, insert
the brass pin into the hole on the counterweight.
9.
Secure the counterweight by tightening the lock knob.
Counter weight is heavy. Please handle with care to avoid
injury!