1
Important Safety Instructions
WARNING: Read and save these instructions! Follow all warnings and instructions specified within this
document and/or on the equipment.
CAUTION: There is no ON/OFF SWITCH for the power supply. The unit will be powered on upon
connecting a valid power supply source. Please make sure to properly shutdown the device’s
operating system prior to removing its power source.
This equipment is designed to be installed within an environment that provides a pollution degree max.
2 and category II NON HAZARDOUS LOCATIONS, and within indoor conditions only. The equipment shall
be installed in a FIXED or DESKTOP configuration and should be installed by qualified personnel only
(person having the appropriate technical training and experience necessary for product installation).
When installing the equipment, please make sure that cables are installed so that accidents cannot
occur. Cables connected to the equipment must not be subject to any mechanical strain.
To reduce the risk of fire, electric shock and/or injury, observe the following:
Do not position the equipment as such that persons could walk on the connected cables.
Do not spill any type of liquid substance on or near the equipment.
Do not touch the equipment and its connected cables during an electrical storm; there may be a
risk of electric shock.
Do not attempt to connect this equipment to electrical outlets controlled by switches or
automatic timers.
Do not attempt to perform hardware service on this product yourself. Opening the equipment
casing may expose you to dangerous voltage or other risks. Refer servicing to IONODEs technical
service personnel. Never open the device yourself as this will void the warranty.
The equipment should be situated away from heat sources such as radiators, heat registers,
stoves, or other products that produce heat.
Do not place a heavy object on or step on the product. The object may fall, causing serious
personal injury and serious damage to the product.
Note:
Opening the equipment case, damaging or altering the tamper proof label will void the
warranty.