11.2
Firmware Updates
The second option in the
Maintenance
tab is the
Firmware Update
task which allows you to update
your appliance to the latest firmware version.
To update the appliance firmware:
1.
From the
Maintenance
window, click on the
Update
button.
a.
You will be asked for the firmware update file
b.
Select the .iof file which was provided by IONODES (can be found at
www.ionodes.com
)
2.
The following status messages will be displayed during the update:
a.
Firmware upload in progress... (100%)
b.
Firmware uploaded. Saving to internal storage... (0%)
c.
Validating and decompressing firmware... (0%)
d.
Firmware ready for installation. Rebooting device... (0%)
3.
The web page will disconnect from the device while it is being rebooted to apply the new
firmware.
4.
You will be prompted for login once the device is up again.
a.
The ‘Testing firmware stability...’ status message will be displayed while the system
validates the new firmware.
5.
The ‘Firmware update complete. (100%)’ status message will be displayed once the process is
completed.
11.3
Factory Default Configuration
The fifth option in the
Maintenance
tab is the
Reset
task which allows you to reset your appliance to the
factory default settings. Note that this operation will not reset your network settings.
To return your appliance to factory default:
1.
From the
Maintenance
window, click on the
Reset
button.
2.
The appliance will apply the default settings and may reboot to return to factory defaults.