7.6
Power Setup
Once all above setup steps have been completed attach the supplied AC/DC power adapter to the
appliance. Connect the DC side of the power adapter to the power supply input located on the rear
panel of the appliance. You can then connect the AC side of the power adapter to a wall socket or
power bar.
Note:
The appliance is configured to automatically boot up as soon as power is applied. There is
no ON/OFF button to control power to the device.
Warning:
To reduce the risk of electrical shock or damage to the equipment:
Do not disable the power grounding plug. The grounding plug is an important safety feature.
If the electrical plug you are using does not have a ground plug receptacle, contact a
licensed electrician to have it replaced with a grounded electrical outlet.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
Disconnect the power from the appliance by unplugging the power cord either from the
electrical outlet or the computer.
