Cleaning the pre-filter
Remove the pre-filter from the unit, shake off any dust and wash it with clean water.
Cleaning the dust collector
Clean the dust collector with hot water. After a few minutes, dry it using a hairdryer.
Removing and Attaching the UV lamp*
Removing the UV lamp:
Disconnect the unit from the power supply, and then
remove the front cover and all the filters. Allow the UV lamp to cool down for 15
minutes. Then hold both ends of the UV lamp and take it out.
Pull out the electrostatic dust collector.
Remove the rest of the filters in the unit from the bottom, as indicated in the
diagram.
2.
3.
4
5
Summary of Contents for mini uv ion310
Page 1: ......
