.
IMPORTANT INFORMATION: Please exercise caution when operating this
appliance. Kindly read the warnings below to prevent electrical shock,
injury, fire hazards or inconveniences.
Do not use the unit outdoors.
Keep the unit away from direct sunlight.
Keep the unit on a flat, stable surface.
Use the proper voltage specified suitable for this product.
Do not let children operate this unit without adult supervision.
Always disconnect the unit from power supply before removing internal parts
for cleaning.
Do not touch any parts within the unit during operation to prevent injury or
damage.
Do not open the casing of this unit to prevent causing injury and nullifying
warranty.
Never wash the unit with water or touch it with wet hands.
Do not use the unit in bathrooms, humid areas, near fireplaces, or place it in
proximity to flammable or combustible products.
Do not place any objects on top of the unit or sit on top of the unit.
Do not block the air intake and outtake of the unit to prevent possible damage.
Do not use the unit in the kitchen. Ashes from the cooker may follow air
circulation into the unit, leaving oil and dust residues on the unit and its
surrounding area.
Never operate the unit if the plug or cord is damaged. Please contact the
authorised distributor or qualified technicians to replace the damaged parts.
Always turn off and unplug the unit when not in use over a long period of time.
Hold the secured portion of the plug and remove it from the power outlet
gently.
Do not place the power cord near any heat sources.
Keep yourself at a safe distance while the unit is running to prevent hairs,
fingers, clothing and accessories from getting into the unit.
Ensure that the plug has a proper grounding system.
Check the product and clean the unit regularly to prevent excessive deposits
from setting off sparks and causing a fire.
Do not operate the unit without a filter or with a damaged filter. Direct exposure
to the UV light from the UV lamp can cause severe damage to eyes and cause
blindness.
SAFETY INSTRUCTIONS
Attaching the UV lamp:
Holding two ends of the UV lamp, insert the copper
parts of the lamp into the lamp holder. Then replace all the filters into the unit
following the proper sequence as mentioned above.
Caution:
Do not touch the middle part of the lamp. Oil from your fingers will
decrease the effectiveness of the lamp.
*Please take care when handling the UV lamp so as not to damage the lamp
leads.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
6
7
Summary of Contents for mini uv ion310
Page 1: ......
