ion science GasClam, User Manual

Page: 33 / 39

Gasclam Ion Science Ltd
Page 32 of 37
Service and Calibration
Unit calibration
Calibration should only be carried out by an authorised GasClam distributor.
Service
The GasClam should be regularly serviced to ensure correct and accurate operation. It is recommended that it should be
serviced and recalibrated every 12 months.
The GasClam is ATEX certified for use in potentially explosive areas therefore it should only be serviced by qualified
engineers. Failure to do so will invalidate the warranty.
User serviceable parts
Moisture stripping filter: It is recommended that the moisture filter is replaced every time the GasClam is visited. It is
accessed by unscrewing the bottom section of the GasClam. This is done by holding the knurl on the middle section and
gripping the knurls on the top section and turning, see below. The instrument should never be operated without the
filter.
To remove filter;
1) Pull of lower
section
2) Pull of upper
section
1
2