Voice
Bell Schedule
Many companies need a bell for on-duty and off-duty. Some uses manual bell and some uses
electronic. To save cost and provide convenience to management, we integrate bell functions to
fingerprint sensor. You can set the time for the bell. When it is the scheduled time, the device will
automatically play the selected ringtone and trigger the relay signal. The ringtone playing does not
stop until the ringing duration has elapsed.
8.3.1
New Bell Schedule
Enter into
“
Personalize
”
→
”
Bell Schedules
”
→
”
New Bell Schedule
”
.
Voice Prompt:
This parameter is used to set
whether to play voice prompts during the
operation of the FFR terminal. Select "ON" to
enable the voice prompt, and select "OFF" to
mute.
Keyboard Prompt:
This parameter is used to set
whether to generate beep sound in response to
every keyboard touch. Select "ON" to enable the
beep sound, and select "OFF" to mute.
Volume:
This parameter is used to adjust the
volume of voice prompts.
Bell Status:
Enable/Disable this bell.
Bell Time:
The bell rings automatically when it is
the specified time.
Repeat:
Specifies whether to repeat the ringtone.
Bell Type:
You can select between internal
ringing and external ringing. For internal ringing,
the ring tone is played by the loudspeaker of the
terminal. For external ringing, the ring tone is
played by an external electric bell that is wired
with the terminal.
Ring Tone:
Bell ring
Internal bell delay (s):
Specifies the duration for
ringtone play. The value ranges from 1 s to 999s.
