4.1.3
Verification Mode
Enter into
“
New user
”
→
”
Access Control Role
”.
Press
▼
/
▲
to select
“Verification Mode”
on the
interface, press [M/OK]:
4.1.4
Enrolling a Fingerprint
Press
▼
/
▲
to select
“
Fingerprint
”
on the New User interface, press [M/OK]:
4.1.5
Enrolling a Badge
Press
▼
/
▲
to select
“
Badge Number
”
on the New User interface, press [M/OK]:
There are several optional modes to set the
verification way.
1.
Press numeric key corresponding to the
fingerprint as you want, then press [M/OK].
2.
Press your fingerprint on the sensor three
times upon prompting by the device.
Note:
You need to re-enroll if the device says
“Please try again”.
Swipe your badge around the fingerprint
sensor.
Note:
Please take another badge if the device
displays “Error! Badge already enrolled”. The
Badge must be ID/IC card.
