For Example,
(The following access groups have been set in
Access Group
interface):
Note:
To delete a Combined Verification, set all access group numbers to 0.
Duress Settings
When users come across duress, select duress alarm mode, the device will then open the door as
usual and send the alarm signal to the backstage alarm.
Duress Function:
In
[ON] state, press “
Duress Key
”
and then press any registered fingerprint (within
10 seconds), duress alarm will be triggered after successful verification. In [OFF] state, pressing
“
Duress Key
”
will not trigger the alarm.
Alarm on 1:1 Match:
In [ON] state, when a user uses 1:1 Verification Method to verify any
registered fingerprint, alarm will be triggered. In [OFF] state, no alarm signal will be triggered.
Alarm on 1: N Match:
In [ON]
state, when a user uses 1:N Verification Method to verify any
registered fingerprint, alarm will be triggered. In [OFF] state, no alarm signal will be triggered.
Alarm on Password:
In
[ON] state, when a user uses password verification method, alarm will be
triggered. In
[OFF] state, no alarm signal will be triggered.
Alarm Delay (s):
When duress alarm is triggered, the device will send out alarm signal after 10
seconds (default); the alarm delay time can be changed (value ranges from 0 to 999 seconds).
11
USB Manager
Import user information, fingerprint template, attendance data and so on in the device to
attendance software or import user information and fingerprint to other devices through U disk.
As the figure says, Combined Verification 1 is
made up of five members coming from five
different groups---access group 1 / 3 / 5 / 6
/ 8 respectively.
