Iomega STORCENTER px12-350r User Manual Download | Manualshive

Page: 133 / 166

background image

Name

This section displays the video camera's IP address, name, login username, and the destination folder for
the video recording files. Additionally, using the Camera Configuration link, you can modify the video
camera software configuration settings using the video camera's native software. It also displays an icon
that indicates the current state of the video camera. The possible states are:

The video camera is no longer connected to the network.

The video camera is no longer connected to the network, but a recording schedule is set for it. You
should delete this video camera if it is no longer on the network, or fix the network connection so it
can record as scheduled.

The video camera is connected to the network and is currently recording. There is no schedule for
this recording, since it was started manually. The recording must therefore be stopped manually.

The video camera is connected to the network, a recording schedule is set, and the camera is
currently recording.

The video camera is connected to the network and a recording schedule is set for it, but it is not
currently recording.

The video camera is connected to the network, but no recording schedule is set.

Space

The Space column identifies how much disk space is currently used by the video files in the destination
folder for this video camera.

Model

This column lists the model information for this video camera.

Action

For each video camera, you can perform the following actions:

●

Click either

to manually start recording or

to stop recording. These buttons are

available only for video cameras that are currently connected and accessible on the network. Use
the manual start and stop record buttons to start recording at any point and to stop a recording
until the next scheduled start time.

NOTE: During recording, if you want to change the camera resolution and frame rate, you must
stop recording, change the values on the camera's configuration page, and then start the
recording again.

●

Click

to open a live view from your video camera. You may be prompted to supply the

username and password for the video camera.

Adding a Video Camera

You can use the Video Surveillance page to manually add supported video cameras if they are not
discovered automatically on your px12-350r. The Video Surveillance page also displays the current
settings for any video camera attached to your network. For example, you might have video cameras on a
summer house in one geographic location, while your px12-350r is in another geographic location.

If your video camera is already listed, you can modify its settings. To manually add a video camera,
reference the instructions below.

Media Management

Videos

123

«
...
131
132
133
134
135
...
»

Summary of Contents for STORCENTER px12-350r







































































































































































Reviews:

No comments

Related manuals for STORCENTER px12-350r

Brand: GE Pages: 93

Brand: National Instruments Pages: 28

Brand: National Instruments Pages: 19

Brand: National Instruments Pages: 36

Brand: National Instruments Pages: 103

NI PXI-1042 Series

Brand: National Instruments Pages: 12

Brand: National Instruments Pages: 4

Brand: Idis Pages: 31

Brand: Avolites Pages: 24

Brand: ZyXEL Communications Pages: 485

Brand: Velopex Pages: 7

SUPERLOADER DLT MAGAZINE

Brand: Tandberg Data Pages: 6

Brand: Juniper Pages: 825

Brand: OpenVox Pages: 13

Brand: SIIG Pages: 20

Brand: iCEBOX Pages: 57

18x18 Card Cage

Brand: WolfPack Pages: 31

Brand: BWI Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands