4.
Make sure the IomegaWare software is installed. The IomegaWare software package shipped with
your drive system includes drivers required for Iomega FireWire drive systems. Restart after running
the IomegaWare software installer.
5.
If you are connected to a FireWire repeater/hub, ensure it is connected correctly and has power.
6.
Try connecting the Iomega FireWire cable directly to one of the FireWire connections on your
computer, rather than a FireWire device.
7.
If the problem continues, there may be an extension conflict on your system. Go to the
How to get Help
section of this User's Manual for information.
8.
If the Iomega Peerless icon does not appear after the Iomega FireWire drive system is connected, it
may be because there are other bus-powered devices connected and there is not enough available
power for the Iomega FireWire drive system. If this condition exists try the following:
• disconnect other FireWire devices from the computer.
• Connect the AC adapter to the other device(s).
NOTE:
To prevent data loss, do not plug in additional FireWire devices while any FireWire device is in use.
|
top of page
|
Identifying Your Version of Windows
®
98
Your Iomega FireWire Peerless Drive System will only run under Windows 98 Second Edition. Follow these
instructions, If you are unsure which version of Windows 98 is installed on your computer:
1.
Right click on the icon for
My Computer
and select
Properties
.
2.
Click the tab for
General
.
3.
Your version of Windows 98 is listed in the upper right hand corner of the window. If the System
information does not read "Microsoft Windows 98 Second Edition 4.10.2222A," you will need to update
your operating system.
