Resetting the administrator password
This procedure should only be used if there are no administrator users with valid passwords. If a non-administrator user, or another
administrator, forgets their password, another administrator user can reset it for them if you have created more than one administrator user.
Refer to
Modifying a user
for more information. Resetting the Iomega StorCenter ix2-200 will result in all administrator users reverting to non-
administrator users and any manual network configuration settings will have to be reset.
1. To reset the Iomega StorCenter ix2-200 press the small recessed button on the back. The Iomega StorCenter ix2-200 will restart and all administrator
users will revert to non-administrator users.
2. When your Iomega StorCenter ix2-200 device finishes restarting, open the Iomega StorCenter ix2-200 Console. The Device Setup steps will appear
again. Create an administrator user. You can use the same name as a previously created user, since this process will make that user an administrator.
3. Complete the Device Setup as described in
Setup
.
If you had more than one administrator user, you will need to edit each user individually to make them administrators again. Refer to
Modifying a user
.
103
Iomega StorCenter ix2-200
