Manually Configuring the Network
You can have direct control of the network setup.
1. Click
Modify Network Settings
.
2. Uncheck
Automatically configure DNS, WINS, and all IP addresses (DHCP)
.
3.
DNS Servers
— enter the IP addresses of the DNS (Domain Name System) servers. DNS is used for translating the domain name to IP addresses.
4.
WINS Servers
— enter the IP addresses of the WINS server.
5. Click
Apply
to save your settings.
If a DHCP server is unavailable for a network interface card (NIC), the device could auto-assign an IP address, or you can uncheck the
Automatically
acquire network address (DHCP)
checkbox found in the
Information
section of a NIC.
6. The following are settings you can change in the
Information
section:
IP Address
— the static IP address of the Iomega StorCenter ix2-200. An unused IP address from within the range used by the LAN should be
used.
If you are going to use
Remote Access
, it is recommended to use a static IP address for a NIC.
Subnet Mask
— the subnet that the IP address belongs to. The default value is 255.255.255.0.
Gateway
— the gateway IP address needs to be entered in this field.
7. Click
Apply
to save your settings.
82
Iomega StorCenter ix2-200
