6
Option 2: Access Point
This option is used to convert an Ethernet connection to Wi-Fi
Access Point without DHCP support.
1. Make sure the “NetShair_Nano_XXXX” Wi-Fi network is
connected. Open the NetShair Nano App.
2. On the Home screen, tap
Advance Settings.
3. Tap
Set Operation Mode
and then tap
Access Point
.
4. Tap
Restart
to save settings.
5. After the NetShair Nano reboots,
connect an Ethernet cable to the
NetShair Nano. The Network LED
indictor will light solid once a
successful connection has been made.