12
NetShair Nano Setup
(Laptop / Computer)
1. Do not connect Ethernet cable until last step! (See Internet
Connection)
2. Power on the NetShair Nano by plugging it into a powered
USB port on your Laptop or Desktop or by plugging it into a
USB charging adapter for a USB mobile device.
3. Click on the wireless icon on the bottom right corner of the
screen.
4. Choose the
“NetShair_Nano_XXXX”
Network.
5. Enter the default password
“12345678” and then press
OK
to connect.
6. Wireless Network
connection will show
NetShair_Nano_XXXX
connected.
