26
27
Firmware Upgrade Mode
To set the KVM to Firmware Upgrade Mode:
1. Invoke your HSM.
2. Key in: upgrade
3. Press
[Enter]
.
The front panel LEDs flash to indicate Firmware Upgrade Mode is in effect. To exit Firmware Upgrade
Mode, you must power off the switch. See The
Firmware Upgrade Utility
for details
Keyboard Operating Platform
The KVM’s default port configuration is for a PC compatible keyboard. If you are using a PC compatible
keyboard and you have a Mac or Sun attached to a port, you can change the port’s keyboard operating
platform configuration to emulate a Mac or Sun keyboard.
The Firmware Upgrade Mode
Summary of Contents for GCS1204
