InWin 2RAKVI009100, User Manual

Page: 8 / 12

Model : IW-RS216-07 Slim Hybrid Backplane User Manual PAGE 8 OF 12
S1 M/S Selection Function Description S1 M/S Selection Function Description
00 : BP_MASTER
10 : BP_slave2
01 : BP_slave1
11 : BP_slave3
Hardware Specification
HOST Facing Interface
：
MiniSAS HD/OCulink
DEVICE Facing Interface
：
SATA/SAS/NVMe

Indicator
：

Dual color(Blue/Red) LED D1~D4 for Hard Disk Drive Status (Activity/Fail/Locate)

Power LED : Steady Blue - (When HDD is present)

Activity LED: Blinking Blue - (When HDD is Access)

Fail LED : Steady Red (When HDD Failure)

Locate LED : Blinking Red (When HDD Locate)

Environment Control :

Temperature Sensor (RTB1/RTB2) Monitor HDD bay inside temperature.

M/S Link Connector (JB1) for Synchronous signal connection between two backplane.

Connector

SFF-8621 OCULINK 42PIN Connector *1 (CN1)
（
for SAS_12G HOST Interface
）

SFF-8621 OCULINK 42PIN Connector *4 (NVME1~NVME4)

SFF-8639 U.2 68PIN Connector *4 (DISK1~DISK4) for SATA/SAS3 Disk or NVMe
SSD.

P4.2mm Disk Drive Power Connector*1 (PW1)

JD1 MCU Programming Header for Programming MCU Firmware.

S1 DIP Switch for Backplane Master/Slave Selection.