Earth Ground
For protection against Electrostatic Discharge, Invixium recommends the
use of a ground connection between each IXM device to a high quality
Earth Ground available at the install site.
Connect to Earth Ground in one of two ways:
1
EGND wire (Green/Yellow) from the Wired Back Plate
or
2
Loose Earth Ground wire direct to the mounting plate using
one of the wall mounting screws (as shown). Ensure that the
lug is secured tightly for contact between the device and the
mounting plate.
Ensure all Earth Ground connections are made to each device prior to
turning on the power.
Summary of Contents for INGUIDE
Page 1: ...INGUIDE Quick Start Guide...
