Getting Started
1
Remove the Mounting Plate, Wired Back
Cover and Screws from the IXM INSTALL KIT.
2
Install the Mounting Plate at the desired
location (INVIXIUM recommends 135-140 cm
from the floor to the top of the device).
3
Make the necessary connections to the Wired
Back Cover (refer to
Get Wired
Pages).
4
Unscrew and remove the Temporary Back
Cover from the IXM device and connect the
Wired Back Cover using the same screws.
5
Hang your IXM device on the Mounting Plate
and secure it on the bottom with the screw
provided.
Summary of Contents for INGUIDE
Page 1: ...INGUIDE Quick Start Guide...
