7
InvisibleFence.com
Control Panel
Turn the Shields® Gate transmitter over and rotate the control panel cover screw holding the
control panel cover. Refer to page 6; Bottom View image.
• Slide Switches
o
BOUNDARY PLUS® /SHIELDS® Mode
– Sets how the Computer Collar® will react to
Shields Gate. Set to Boundary Plus® mode, activation will occur as your pet crosses
the transmitter. Set to Shields mode, activation occurs as you pet approaches the
transmitter.
o
7K/10K FREQ
– System frequency set by Invisible Fence® dealer.
o
ON/OFF MOTION
– Turns motion sensing on or off. “On” mode allows your Shields Gate
to go into a sleep mode that wakes as it detects motion to save battery life.
o
1/2/3 RATE
– Sets the data rate of the signal. Used to increase battery life. Rate 1 is the
the slowest and consumes the least energy. Rate 3 is the fastest and consumes the most
energy. The faster the data rate, the
more consistent the boundary.
o
A+B/B/A CODE
- Data types used
to separate pet when unit is set to
Shields mode. This switch is unused
in Boundary Plus mode. Refer to
Different Rules for Different Pets™
technology section.
• Range and Program Buttons
o
+ & - Buttons
- Used to adjust the
signal field range. Press simultaneously to lock/unlock the height.
o
P Button
– Used to program the Computer Collar® to Channel A or B when setting
Different Rules for Different Pets™ technology
Shields System Operation:
In Shields mode, your pet’s Computer Collar will activate as it approaches Shields Gate’s
oval-shaped Invisible Boundary® design. This allows you to protect large areas such as couches,
tables and entry ways. Shields mode also allows you to deny access to one pet while allowing
access to another with patented Different Rules for Different Pets technology. Ensure the
BOUNDARY/SHIELDS
switch is in the Shields position.
