Inverto Multibox IDL 400s, Quick Installation Manual

Page: 10 / 26

28
Connecting the Multibox
Remove all protective films from the housing.
ConneCtIng the MUltIbox to SatellIte SIgnalS
The Multibox can be connected to any of the following satellite reception equipment:
Quad / Octo LNBs or Universal multiswitches
Connect the outputs of the LNB/multiswitch to the inputs 1 … 4 of the Multibox via suitable SAT antenna cables.
Note: If you intend to use less than 4 client devices, you require correspondingly less inputs (connect from input
1 and up).
Quattro LNB
Connect the 4 outputs of the Quattro LNB to the 4 inputs 1 … 4 of the Multibox via suitable SAT antenna cables
and ensure the correct port assignment as follows.
QUattro lnb oUtpUt
banD port
MUltIbox InpUt port
Horizontal High
1
Vertical High
2
Horizontal Low
3
Vertical Low 4
Unicable
Connect the Unicable output of the Unicable LNB/multiswitch to input 1 of the Multibox (also marked with “Uni -
cable”) via a suitable SAT antenna cable.
ConneCtIng the MUltIbox to yoUr hoMe netWorK
Conne ct the LAN socket 7 of the Multibox to a LAN connector of your network router/switch/access point via a
LAN cable.
Note: A DHCP server needs to be active in the network (normally integrated in the router and active by default) so
the Multibox will be able to obtain network IP settings automatically. The Multibox shall be connected on the same
network your client devices are connected to (same IP address range).
For a smooth video streaming of satellite Live TV we recommend using a 1GbE LAN router or a 300Mbit/s WLAN
router/access point. In addition, Client devices (e.g. PCs) must have an appropriate computing (CPU) power and
graphic processor.
ConneCtIng the MUltIbox to poWer SUpply
Conn ect the supplier AC/DC power adapter to mains and then connect it to the power supply input 8.