19
En
•
1. Scan mode:
- Select Quick Scan to search for channels on the transponders in the
preset transponder list for the selected satellite.
- Select Complete to search for channels on all transponders for the
selected satellite.
2. Channels:
- Select All to search for all Free-to-Air and Pay TV channels.
- Select Free-to-air to search only for Free-to-air channels.
3. Satellite:
- Select which satellites you want to search.
Once the options are set, press the Red key on the remote control to
start the channel search.
Once a channel search is started, a progress bar and list of channels
found will be displayed. At any time, you may stop the search by
pressing Exit on the remote control. After the channel search is
complete, press the Green key on the remote control to save the
channel list and exit.
After the channel search is fi nished, or stopped by the user, the search
results will be displayed. Here user can see how many “Free to air” and
“Encrypted”, TV and Radio programmes have been found. In addition,
the user can see how many of them are new (see picture 21).
4.1.6.2. Advanced Channel Search
The advanced channel search allows you to make a channel search with
customized search parameters.
The process is the same as in a normal satellite search, described in the
previous section. (see picture 22)
Satellite
Use this option to select which satellite to search.
Frequency
Use this option to set the frequency of the transponder to search.
Polarity
Use this option to set the polarisation of the signal between horizontal,
vertical, right and left circular.
Symbol rate
Use this option to set the symbol rate for the signal.
FEC
Use this option to set the FEC (Forward error correction).
PIDs
Use this option to set the PIDs between automatic and manual. If you choose manual, you can set the individual Audio and Video
PIDs and the PCR.
Video PID
Use this option to manually set the Video PID.
Picture 20
Picture 21
Picture 22
