Par
Description
Units
P0-51
PDI Cyclic Data
-
Displays the incoming PDI processor data when a fieldbus interface is connected and operating that supports process data
interchange, useful for fieldbus diagnostics and trouble shooting.
P0-52
PDO Cyclic Data
-
Displays the outgoing PDO processor data when a fieldbus interface is connected and operating that supports process data
interchange, useful for fieldbus diagnostics and trouble shooting.
P0-53
Current Phase U Offset and Ref
-
Index 1 : Reference
Index 2 : Sampled Value
P0-54
Current Phase V Offset and Ref
-
Index 1 : Reference
Index 2 : Sampled Value
P0-55
Last Fire Mode Activation Time
Hours
Specifies the time (from the drive lifetime clock) at which the Fire Mode was last activated
P0-56
Fire Mode Activation Period
Minutes
Specifies the duration of the last fire mode activation
P0-57
Ud / Uq
-
Index 1 : Ud
Index 2 : Uq
P0-58
Load Profile Current Values
A
This parameter has 5 indeces which hold the load profile current values following the activation of the torque monitoring function
where the drive carries out a load profile autotune. See P8-06 for further information
P0-59
Frequency Input Reference
Hz / Rpm
Displays the speed setpoint when a frequency input is used for the speed reference.
P0-60
Fire Mode Total Activation Time
Minutes
Specifies the total accumulated time that fire mode has been activated on the drive
P0-61
Relay Control Speed Hysteresis Value
Hz / rpm
Displays the speed hysteresis value in use for output relay settings that use hysteresis, defined by P6-04.
P0-62
Fire Mode Total Acitvation Counter
-
Specifies the total number of times that Fire Mode has been activated on the drive
P0-63
Post Ramp Speed Reference
Hz / rpm
Displays the speed reference after all ramps and limits are applied.
P0-64
Internal Effective Switching Frequency
-
Shows the effective switching frequency presently active.
P0-65
Drive Life Time
-
Displays the total time for which the drive has been powered on. The value is not resettable.
P0-66
Function Block Program ID
-
Displays the ID of any internally loaded Function Block Program.
P0-67
Overload Integration Level
%
Displays the value of the motor thermal overload integration level in %. The value in this parameter will increase if the motor current is
greater than the motor rated current (P1-08) or decrease if the motor current is lower than the motor rated current. When this value
reaches 100% the drive will trip out on
It.trP
P0-68
User Ramp Value
s
Displays the “User Ramp Time” value, which may be set via the internal Function Block Program.
P0-69
I2C Error Count
-
P0-70
Option Module Type
-
Displays the type of option module fitted in the drive option slot. The displayed values are
: Extended I/O or Cascade Module
: Fieldbus Interface
: No Module Fitted
: Unkown or onrecognised Module
P0-71
Fieldbus Interface Type
-
Displays the type of option module, if fitted in the drive option slot. The displayed values are
.
: No Filedbus Module
: Profibus Module fitted
: DeviceNet Module fitted
: Ethernet IP Module fitted
: BACnet IP Module fitted
P0-72
Drive Internal Temperature
°C
Internal Value
P0-73
24 Hour Timer
H:MM
Internal Value
