inventiv 202117, Safety And Operating Manual

Page: 31 / 48

SAFETY AND OPERATING MANUAL
31
202093 ROTARY HAMMER 1500W
MAINTENANCE
WORKING HINTS FOR YOUR ROUTER
TROUBLESHOOTING
ENVIRONMENTAL PROTECTION
Remove the plug from the socket before carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry cloth. Always store your power tool in a dry place.
Keep the motor ventilation slots clean. Keep all working controls free of dust. Occasionally you
may see sparks through the ventilation slots. This is normal and will not damage your power tool.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
1 Using without a guide
This is useful for signwriting and creative work. User only shallow cuts.
2 Rate of feed
The cutter of your router rotates clockwise. For more efficient cutting, move your router from left
to right as you stand facing the workpiece.
NOTE: When cutting outside edges, move your router counterclockwise and clockwise when
cutting inside edges.
1 If your router will not operate, check the power at the mains plug.
2 If a fault cannot be rectified, return the drill to an authorized dealer for repair.
Li-Io
Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority or retailer for recycling advice.