inVENTer 1505-0036, Setup

Page: 9 / 24

Before pairing the ventilation units, remove the panel/closing flap of the
Connect inner cover.
Device pairing

The display screen shows the
determined values for room temperature
and humidity at the controller‘s
installation location.

Initial set up of the Easy Connect e16
controller is executed.


Up to 16 system components (ventilation units [Connect inner covers],
sensors, switching contact) can be paired with the Easy Connect e16
controller and thus be integrated into the inVENTer Connect controller
platform. To do so:
• activate component pairing on the controller;
• activate all system components to be integrated;
• complete component pairing on the controller.
5