inVENTer 1505-0036, Setup

Page: 13 / 24

Once all system components are paired, refit the inner cover.
NOTICE: For this purpose the locking arm must be swivelled to the right!
 Pause the ventilation unit:
press the
pause key on the
controller twice .

The pause symbol II flashes.

The locking arm swivels to the right.
 Confirm with the selection key .
 Mount the cover by sliding the lower lugs into the guide and pressing the
cover against the Connect inner cover.
 Putting the ventilation unit into operation again: Press the pause key
on the controller until the „automatic“ symbol  flashes. The automatic
closing flaps are opened again. The ventilation units start operating.
 
Time
Ventilation profile:
Default (can be modified)
2 x