31
2) Tag reading
Before reading and writing tags, it is required to “Select antenna” -> set the
“power output” standard of the operating country (the default output is 30dBm)
-> select “Tag type” 6C/6B/GB (the default is 6C) -> click “Start scanning” to
display the EPC data of the read tag in the interface, as shown in Figure 6.4
below. Click the “Stop scanning” to end the current tag reading action. Click “Clear
display” to clear the tag information in the box.
Figure 6.4 Tag Reading
RF settings shall match the operating country/region and comply with local
laws and regulations. The user is responsible for ensuring that correct RF settings
are used for operation, and is fully responsible for any fines and other losses
caused by incorrect settings of reader or settings not conforming to national/
regional regulations.
