SECTION 4—FRONT RIGGINGS
Part No. 1110546
21
Tracer® EX2
Fixed Frame
NOTE:
For
this
procedure,
refer
to
FIGURE 4.4
1.
Remove
impact
guards
and/or
calf
strap,
if
necessary.
2.
Loosen,
but
do
not
remove
the
bolt
and
locknut
that
secure
the
lower
footrest
assembly
to
the
upper
footrest
support.
3.
Reposition
the
lower
footrest
assembly
to
the
desired
height.
4.
Securely
tighten
the
bolt
and
locknut.
5.
Repeat
this
procedure
for
the
other
footrest,
if
necessary.
6.
Replace
impact
guards
and/or
calf
strap,
if
necessary.
FIGURE 4.4
Fixed Frame
Raising/Lowering Elevating Legrest Assembly
WARNING
Ensure hands and fingers are clear of elevating legrest mechanism before pushing release lever
to lower the elevating legrest. Otherwise injury may occur due to pinch points.
The wheelchair user’s leg MUST be supported by an assistant before attempting to lower
legrest.
NOTE:
For
this
procedure,
refer
to
FIGURE 4.5.
1.
To
raise
the
elevating
legrest,
the
assistant
should
hold
the
support
tube
and
raise
the
elevating
legrest
until
the
desired
height
is
obtained.
2.
To
lower
the
elevating
legrest,
perform
the
following:
A. Support
user
leg
with
one
hand.
B. Push
release
lever
downward
with
other
hand.
C.
Gently,
lower
user
leg
down
and
rest
against
the
legrest.
FIGURE 4.5
Raising/Lowering Elevating Legrest Assembly
Bolt and
Locknut
Wheelchair Frame
Footplate
Assembly
Release Lever
Support
Tube
