background image

Owner’s Operator and Maintenance Manual

DEALER:

 This manual MUST be given to 

the user of the wheelchair.

USER:

 BEFORE using this wheelchair, read 

this manual and save for future reference.

For more information regarding 

Invacare products,  parts, and services, 

please visit www.invacare.com

SPECIAL NOTES  ........................................................................................3
LABEL LOCATION .....................................................................................4
TYPICAL PRODUCT PARAMETERS .............................................................5
SECTION 1—GENERAL GUIDELINES ............................................................6
SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS ....................................9
SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING ............................ 15
SECTION 4—FRONT RIGGINGS ................................................................ 19
SECTION 5—ARMS .................................................................................. 24
SECTION 6—SEAT AND BACK  ................................................................. 26
SECTION 7—REAR WHEELS ...................................................................... 30
SECTION 8—FRONT CASTERS .................................................................. 32
SECTION 9—ANTI-TIPPERS/WHEEL LOCKS ................................................ 34
SECTION 10—SEAT TO FLOOR  ................................................................. 37
SECTION 11—OPTIONS ........................................................................... 38
LIMITED WARRANTY .............................................................................. 40

Tracer EX2

Summary of Contents for TRACER EX2









































Reviews: